Biotemplated Fabrication of ZnO Microstructures with Enhanced Photocatalytic Properties from Rape Pollen

Crystallography Reports - Sodium dodecyl sulfonate and rape pollen were selected as soft and hard templates to induce ZnO formation under hydrothermal conditions, respectively. In the preparation...     

水热法制备二氧化锡/钨酸铋复合光催化材料及其催化活性研究

本文用水热法制备了正交晶系的纳米球状结构的二氧化锡和正交晶系的由片状聚集成球状结构的钨酸铋,并且对二者进行了复合,制备出了二氧化锡/钨酸铋复合光催化材料。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、比表面积测试仪(BET)、紫外可见分光光度计等技术对复合样品的结构、形貌、比表面积、孔容孔径和光学性质进行了表征。用碘钨灯模拟太阳光,分别以二氧化锡、钨酸铋和二氧化锡/钨酸铋复合材料为催化剂降解罗丹明B(RhB),研究所制备的二氧化锡/钨酸铋复合材料的光催化活性。光催化90 min时二氧化锡、钨酸铋和二氧化锡/钨酸铋对罗丹明B的降解率分别是9%、22%和30%。实验结果表明,在可见光下,二氧化锡/钨酸铋复合材料的光催化活性要高于单一的二氧化锡和钨酸铋。     

3.0T MRI检查结合X线钼靶诊断乳腺恶性肿瘤的研究

本研究探讨3.0T磁共振成像(MRI)结合X线钼靶诊断乳腺恶性肿瘤的价值。采用回顾性研究方法,选取乳腺肿块患者110例162个病灶,给予3.0T MRI及X线钼靶检查。经病理确诊为恶性病变101个;恶性病灶形态不规则、边缘毛刺、时间-信号强度曲线(TIC)类型Ⅲ型和早期增强率≥60%比例明显高于良性病灶(P<0.05),而分叶状比例和表观扩散系数(ADC)值明显低于良性病变(P<0.05);恶性病变X线钼靶表现:形态不规则、钙化、结构不对称和大导管征比例明显高于良性病变(P<0.05);MRI联合X线钼靶诊断乳腺恶性病变的灵敏性、准确性和阴性预测值明显高于MRI诊断(P<0.05)。3.0T MRI检查结合X线钼靶诊断乳腺恶性肿瘤有较好的价值。     

对《关于〈一维圆环上双原子链的马德隆常数〉的解析解》的讨论

本文绘制了一维等距离子晶体的累加法、埃夫琴法和平均值法的各级马德隆常数的曲线.本文推导了二聚化直线离子晶体马德隆常数的求和式,比较了两种解析式的优劣.本文详细地推导了圆环上等距和二聚化离子晶体的马德隆常数的解析式,使读者更易于理解.本文修正了《关于〈一维圆环上双原子链的马德隆常数〉的解析解》的两个笔误,还建议修正二聚化马德隆常数的定义式,使其物理意义更明显.     

Multilayered 2D Cesium-Based Hybrid Perovskite with Strong Polarization Sensitivity: Dimensional Reduction of CsPbBr3

3D perovskite CsPbBr₃ has recently taken a blooming position for optoelectronic applications. However, due to the lack of natural anisotropy of optical attributes, it is a great challenge to fulfil polarization-sensitive photodetection. Here, for the first time, we exploited dimensionality reduction of CsPbBr₃ to tailor a 2D-multilayered hybrid perovskite, (TRA)₂CsPb₂Br₇ ( 1 , in which TRA is (carboxy)cyclohexylmethylammonium), serving as a potential polarized-light detecting candidate. Its unique quantum-confined 2D structure results in intrinsic anisotropy of electrical conductivity, optical absorbance, and polarization-dependent responses. Particularly, it exhibits remarkable dichroism with the photocurrent ratio (I_pc/I_pa) of ≈2.1, being much higher than that of the isotropic CsPbBr₃ crystal and reported CH₃NH₃PbI₃ nanowire (≈1.3), which reveals its great potentials for polarization-sensitive photodetection. Further, crystal-based detectors of 1 show fascinating responses to the polarized light, including high detectivity (>10¹⁰ Jones), fast responding time (≈300 μs), and sizeable on/off current ratios (>10⁴). To our best knowledge, this is the first study on 2D Cs-based hybrid perovskite exhibiting strong polarization-sensitivity. The work highlights an effective pathway to explore new polarization sensitive candidates for hybrid perovskites and promotes their future electronic applications.     

含酰胺结构超低膨胀聚酰亚胺薄膜的热膨胀行为

采用联苯二酐与3种含酰胺结构二胺制备了具有不同取代基团的聚酰胺-酰亚胺薄膜, 考察了酰胺结构对薄膜力学、 耐热及尺寸稳定性的影响, 研究了聚集态结构与薄膜热膨胀行为的关系和规律. 该系列薄膜具有超高强度和优异的耐热性能, 拉伸强度高达280.5 MPa, 玻璃化转变温度在389~409 ℃, 并在30~300 ℃温度范围内表现出超低负膨胀, 热膨胀系数(CTE, ppm/℃, 即10 ⁶ cm·cm ^-1·℃ ^-1)在-3.05~-1.74 ppm/℃之间. 聚集态分析结果表明, 酰胺结构使分子链间形成了强氢键相互作用, 分子链在薄膜面内方向高度有序取向, 并在膜厚方向堆积更为紧密, 使薄膜表现出热收缩现象. 通过不同体积大小的取代基团进一步调控分子链间相互作用及排列堆积, 可实现薄膜在高温下近乎零尺寸形变, 为设计制备超低膨胀聚合物基板材料提供了新思路.     

磁性纳米颗粒系统偶极相互作用的Monte Carlo研究

采用局域Monte Carlo方法模拟不同易轴分布的简单立方排列单分散单畴Fe纳米颗粒系统的ZFC-FC曲线及磁滞回线.结果表明：随着偶极相互作用的增强，系统的阻塞温度T_B逐渐增大，且ZFC曲线的峰变宽.说明偶极相互作用使得系统的有效能垒提高，分布宽度增加.研究FC曲线磁化强度的倒数与温度关系，发现偶极相互作用系统中存在反铁磁有序.系统的阻塞态及超顺磁态的磁滞回线表明，极低低温下，随着偶极相互作用的增强，系统的矫顽力和剩磁减小，偶极相互作用阻碍系统的磁化；系统处于超顺磁态，各向异性作用及偶极相互作用使得系统的磁化曲线偏离Langevin曲线且偶极相互作用展现出退磁相互作用效应.偶极相互作用增强，系统磁化曲线与Langevin曲线偏差量的最大值向低场移动.在偶极相互作用下，易轴与外场夹角为45°的磁性纳米颗粒系统的平均有效能垒和有效能垒分布宽度较易轴随机分布系统的大.     

枝晶生长理论中的热-动力学协同

随加工工艺趋于复杂化和极端化,基于热力学驱动力和动力学能垒相对独立的枝晶生长理论已无法精确描述多种机制共同作用的非平衡凝固过程,大大限制了该理论与工业应用的结合。首先,本文综述基于热-动力学相对独立的枝晶生长理论的发展,分析其内涵的本征热-动力学相关性,并集成于以双辊薄带连铸技术为背景的基于热-动力学相关性的枝晶生长模型。其次,定量证明了热力学驱动力和动力学能垒的相关性,通过选择不同的驱动力-能垒组合,试图在双辊薄带连铸技术中实现合金设计和工艺优化。最后,通过分析现有模型的不足,对进一步枝晶生长模型的发展以及与工艺的结合进行展望。     

光驱动C1转换到高附加值化学品的研究进展

阐述了光驱动C1化学的最新研究进展, 分别对光驱动费托合成、 水煤气变换、 二氧化碳加氢、 甲烷重整和甲醇重整制氢的研究进行了综述, 提出了当前研究存在的问题及发展方向.     

Improved Reversible Zinc Storage Achieved in a Constitutionally Crystalline-Stable Mn(VO3)2 Nanobelts Cathode

Rechargeable zinc-ion batteries (ZIBs) are potential for grid-scale applications owing to their safety, low price, and available sources. The development of ZIBs cathode with high specific capacity, wide operating voltage window and stable cyclability is urgently needed in next-generation commercial batteries. Herein, we report a structurally crystalline-stable Mn(VO₃)₂ nanobelts cathode for ZIBs prepared via a facile hydrothermal method. The as-synthesized Mn(VO₃)₂ exhibited high specific capacity of 350 mAh g⁻¹ at 0.1 A g⁻¹, and maintained a capacity retention of 92 % after 10,000 cycles at 2 A g⁻¹. It also showed good rate performance and obtained a reversible capacity of up to 200 mAh g⁻¹ after 600 cycles at 0.2 A g⁻¹ under −20 °C. The electrochemical tests suggest that Mn(VO₃)₂ nanobelts impart fast Zn²⁺ ions migration, and the introduction of manganese atoms help make the structures more indestructible, leading to a good rate performance and prolonged cycle lifespan.